Gasblender unit -20%+40%+2x50% CO2

Gasblender unit -20%+40%+2x50% CO2

Description

Connect two Co2 bottles and two N2 bottles.
The inlet pressure must be set to a minimum of 5,5 bar on the Primary regulators for the blender unit to activate.
An inlet pressure just below 6 bar is appropiate.
Connect the Secondary regulator outlets to the corresponding beer type and adjust the pressure according to the prevailing Conditions* at the current location.

*Python length, climb, tap-speed etc. A typical pressure interval are between 2,5-2,8 bar.

 Drawing
arrow_upward